Bathroom Renovation and Bathroom Plumbing Material Choices

The first step in planning a bathroom renovation is to choose the right plumbing materials and whether you want do everything yourself or hire this plumber in Dallas. Among the most common choices are CPVC, PEX, and Cast iron. Whether copper or cast iron is the right choice depends on your budget and taste. CPVC, however, is more likely to swell when exposed to damp conditions. In addition, cast iron tubs and sinks are more prone to rust than cheap, fiberglass or acrylic surfaces.

Cast iron

While copper is the most common choice for bathroom plumbing, cast iron is one of the least common. It has its advantages and disadvantages. The most obvious is that copper tends to rust and can be expensive. Cast iron is strong, however, so it will not break under pressure. There are other benefits and drawbacks of PVC and cast iron pipe systems. Read on to learn more about each. Choosing the best type of bathroom plumbing material will depend on several factors, including the design of the room.

Copper

While copper is beautiful, it is also more expensive than PEX. Copper water pipes cost approximately 58 to 68 percent more than PEX, which means a complete replacement could cost $8,000 to $10,000. PVC pipes are easier to install but can cost up to four times as much. Both materials are appealing to the eye. However, one consideration should be made before choosing copper as your material of choice. Listed below are some benefits of copper plumbing.

PEX

When renovating your bathroom, consider PEX versus copper pipes for your water lines. While this material has many advantages over copper, it does have its disadvantages. The main drawback is that PEX is not recyclable. The only way to recycle PEX is to burn it. The popularity of PEX pipes means that the demand for recycled PEX is growing. PEX is also a DIY-friendly material, but it requires special tools and connectors.

CPVC

CPVC has a lot of advantages over copper for bathroom plumbing and renovation. However, the main disadvantage is its brittleness and high thermal expansion coefficient, which make it not a good option for climates with large temperature variations. This is why it is usually double the price of standard PVC. However, it is also easy to install and requires little maintenance. This makes it a good choice for most applications, but you should check the local building codes to make sure.

ABS

When choosing between PVC and ABS for your bathroom renovation or new plumbing, you have to take several things into consideration. While ABS is always black, PVC is usually white. Some places mandate the use of ABS pipe while others leave the choice up to you and your builder. Here’s a look at the pros and cons of each material. And don’t forget to check your local building codes! Listed below are some pros and cons of each type of piping.

In case you need a plumber near Dallas, then check out https://www.rodgersplumbing.com for all your plumbing needs.